Poly fit solvent joint UPVC SYST
UPVC FITTING DETAILS
| ASTM D2466 UPVC SCH-40 | |||||
| Fitting | Pieces Per Carton | Fittings | Pieces Per Carton | ||
| Elbow 45° | 116 | Yee 2" | 80 | ||
| Elbow 45° | 60 | Yee 3" | 24 | ||
| Elbow 45° | 40 | Yee 4" | 16 | ||
| Elbow 45° | 12 | Yee 6" | 4 | ||
| Elbow 90° | 80 | P. Trap | 72 | ||
| Elbow 90° | 48 | P. Trap | 24 | ||
| Elbow 90° | 32 | P. Trap | 16 | ||
| Elbow 90° | 15 | Cleaning I | 270 | ||
| Elbow 90° | 8 | Cleaning I | 72 | ||
| Elbow Ma | 48 | Cleaning I | 36 | ||
| Elbow Ma | 32 | Cleaning I | 12 | ||
| Plug Elbo | 40 | End Cap | 280 | ||
| Plug Elbo | 26 | End Cap | 90 | ||
| Plug Elbo | 8 | End Cap | 48 | ||
| Tee 2" | 60 | End Cap | 15 | ||
| Tee 3" | 33 | Off Set | 20 | ||
| Tee 4" | 24 | Off Set | 24 | ||
| Tee 5" | 11 | Socket | 123 | ||
| Tee 6" | 6 | Socket | 60 | ||
| Plug Tee | 27 | Socket | 66 | ||
| Plug Tee | 18 | Socket | 21 | ||
| Plug Tee | 6 | Multi Floo | 18 | ||
| M.F Tee | 24 | ||||
| Reduced | Pieces Per Carton | Reduced | Pieces Per Carton | ||
| Elbow 3 | 78 | Socket 3" | 80 | ||
| Elbow 4 | 34 | Socket 4" | 48 | ||
| Tee 3 | 40 | Socket 4 | 48 | ||
| Tee 4" | 32 | Bush 3" | 100 | ||
| Tee 4" | 24 | Bush 4" | 60 | ||
| Tee 6" | 8 | Bush 4" | 60 | ||
| Yee 4 | 24 | Bush 6" | 15 | ||
| Yee 4 | 20 | ||||
| Yee 6"/4 | 6 | ||||
Pipes for both PRESSURE and NON-PRESSURE
[schedue 40] and NON-PRESSURE sizes from 2 inch to 8 inches dimension
SDR SERIES
SDR-26, SDR-32.5, SDR-64
In B.S. Standard 3505
CLASS B for 6 bar pressure rating pipes commonly applied and installed for house hold sewer systems.
CLASS C for pressure pipe systems commonly used in pressure water installation and it bears 9 bar pressure.
CLASS D for pressure pipe systems commonly used in pressure water installation, sprinkler, tube well etc and it bears 15 bar pressure.
CLASS M only used in NON-PRESSUE Installation like house hold sewerage installation or drain water application.
DELIVERY any where in PAKISTAN
CONTACT +92-300-2856741
Solder fittings, which are short sections of smooth pipe designed to slide over the outside of the mating tube, are usually used for copper joints. There are two types of fittings: end feed fittings which contain no solder, and solder ring fittings.
ReplyDelete