CI Main hole Cover

CI Main hole Cover

Available in all Sizes from 6" to 24"

Pedestrian and heavy duty weight proof

SUPPLY ALL OVER PAKISTAN

ISLAMABAD, RAWALPINDI, KARACHI

CONTACT

0300-2856741

PVC main hole cover

UPVC Main hole Cover

Available in White and Black Color

Both Pedestrian and heavy duty and weight proof 

SUPPLY ALL OVER PAKISTAN

ISLAMABAD, RAWALPINDI, KARACHI

CONTACT

0300-2856741

GM PVC PROPERTIES

Properties

Material:

unplasticized polyvinyl chloride (uPVC)

General Properties:

a.Specify gravity1.42 gm / cm³

b.Water absorption4 gm / cm²

c.FlammabiltyWill not support combustion

Thermal Properties:

a.Softening point80 °C

b.Specific heat0.25 cal / °C

c.Thermal conductivity0.13 cal / cm-h-C

d.Coefficient of linear expansion6.7 x 10^{-5 °C}

e.Elongation at break10-50%

Mechanical Properties:

a.Ultimate tensile strength475-525 kfg / cm²

b.Compressive strength670 kgf / cm²

c.Flexural strength950 kgf / cm²

d.Impact stregth4-4.5 joules

e.Modules of elasticity3.2 x 10kgf / cm

Electrical Properties:

a.Volume resistivity10¹⁴ohm / cm

b.Surface resistivity10¹²ohm / cm

c.Power factor (at 10 cycles)3.0

uPVC is a non conductor of electricity and also non subject to galvanic of eletrolytic attack. Electrical equipments should not be earthened to (uPVC) pipes.

Color:

White (other colors are available on request).

POLY FIT UPVC PIPE

Poly fit solvent joint UPVC SYST

UPVC FITTING DETAILS

	ASTM D2466  UPVC SCH-40
Fitting	Pieces Per Carton		Fittings	Pieces Per Carton
Elbow 45°	116		Yee   2"	80
Elbow 45°	60		Yee   3"	24
Elbow 45°	40		Yee   4"	16
Elbow 45°	12		Yee   6"	4
Elbow 90°	80		P. Trap	72
Elbow 90°	48		P. Trap	24
Elbow 90°	32		P. Trap	16
Elbow 90°	15		Cleaning I	270
Elbow 90°	8		Cleaning I	72
Elbow Ma	48		Cleaning I	36
Elbow Ma	32		Cleaning I	12
Plug Elbo	40		End Cap	280
Plug Elbo	26		End Cap	90
Plug Elbo	8		End Cap	48
Tee   2"	60		End Cap	15
Tee   3"	33		Off Set	20
Tee   4"	24		Off Set	24
Tee  5"	11		Socket	123
Tee   6"	6		Socket	60
Plug  Tee	27		Socket	66
Plug  Tee	18		Socket	21
Plug  Tee	6		Multi Floo	18
M.F  Tee	24
Reduced	Pieces Per Carton		Reduced	Pieces Per Carton
Elbow    3	78		Socket  3"	80
Elbow    4	34		Socket  4"	48
Tee        3	40		Socket   4	48
Tee       4"	32		Bush     3"	100
Tee       4"	24		Bush     4"	60
Tee       6"	8		Bush     4"	60
Yee       4	24		Bush     6"	15
Yee       4	20
Yee   6"/4	6

 Pipes for both PRESSURE and NON-PRESSURE

[schedue 40] and NON-PRESSURE sizes from 2 inch to 8 inches dimension   

SDR SERIES 

SDR-26, SDR-32.5, SDR-64

In B.S. Standard 3505

CLASS B for 6 bar pressure rating pipes commonly applied and installed for house hold sewer systems.

CLASS C for pressure pipe systems commonly used in pressure water installation and it bears 9 bar pressure.

CLASS D  for pressure pipe systems commonly used in pressure water installation, sprinkler, tube well etc and it bears 15 bar pressure.

CLASS M only used in NON-PRESSUE Installation like house hold sewerage installation or drain water application.

DELIVERY  any where in PAKISTAN

CONTACT +92-300-2856741

RAKTHERM PPRC PIPE AND FITTING

SIZES AVAILABLE FROM 20MM TO 110MM
COMPLETE PIPE AND FITTINGS
AVAILABLE IN ALUMINUM FOILED FOR TILT RESISTANCE AND FOR HOT WATER
ALSO AVAILABLE FOR EXPOSE AND ULTRA VIOLET RAYS RESISTANCE

--
CONTACT,
Abdul Rahman Khan (A.R. Corporation)
0300-2856741,0333-3645773,0322-3540656

RAK pprc

RAK pprc

3rd generation technology pipe from petroleum "Poly propolene random co-polymer".

Made UAE (dubai)

for Hot and cold water and any kind of liquid.

available dia: 20mm to 110mm (equal to 1/2" to 4")

PN 10, 20, 25 pipe and PN 25 fittings.

green color

for construction of: banglow, project, plaza, any kind of water supply or food grade liquid supply.

contact; 0300-2856741

AGM PVC pipe

AGM PVC

UPVC and CPVC pipe and fitting

make saudi Arabia

ASTM (American society of Testing Material)

Quality Assurance

AGM high performance extruders with advanced process control and monitoring system permit increased rate of production over entire diameter ranges, adhering to the highest quality.

AGM high technology moulding machines with advanced automated tooling, permit high volume production of fittings with exceptionally high consistency in terms of dimensional accuracy, mechanical strength and surface finish.

At AGM, sophisticated quality control procedures and advanced manufacturing techniques work hand in hand to assure the highest quality and dimensional consistency in thermoplastic piping products.

AGM high technology moulding machines with advanced automated tooling, permit high volume production of fittings with exceptionally high consistency in terms of dimensional accuracy, mechanical strength and surface finish.

Advantages of AGM Pipes

1. Economic

2. Temperature Resistant

3. Durable

4. Flexibility

5. Light Weight

6. Impact Strength

7. Non Toxic

8. Corrosion resistance

9. Easy Installation

SIZES FROM; half inch to 8 inches dimension. 

APPLICATION

Used in all kind or water supply, irrigation, sprinklers, hot and cold house hold water supply, geezer supply, concealed and exposed fitting, bear all temperature, LED FREE, CHALK FREE PVC, IMPORTED MATERIAL. Also used in air conditioning system, boiler chiller supply and all kind of pressure and non pressure [sdr standard dimension ratio] product ranges.

DELIVERY SPOTS =  EVERY WHERE IN PAKISTAN

CALL +92-300-2856741

A.R. Corporation

A.R. Corporation

complete sanitary house in Pakistan (Islamabad / Rawalpindi city)

A.R. Corporations offers you a wide range of Sanitary Upvc and PPR C pipe and fittings of all Variety product imported , chinees and local brands at your own door. The Details are following:

(Introduction Video "A.R. Corporation")

2. AGM Upvc impoted Saudi arab. For hot & cold water drain sewer and ventilation, from half inch to 8 inches .
3. ACCU-FIT  Upvc pakistan made, for sewer, drain, vantilation from 1/2" to 6" complete pipe and fittings.
4. RAKtherm PPRC impoted from UAE. 20mm to 110mm complete pipe fittings.
5. F.S. PPRC pakistan made, 20 to 63 complete pipe fittings for hot and cold water supply system of your construction made in Taiwan.
7. WEIJE PPRC impoted from China 20mm to 63mm complete pipe fittings.
8. Water Tanks from 100 Liters to 1000 Ltrs. available with best quality for your water storage purpose.
   
9. CERAMICS PORTA all accessories imported from (USA).
10. C.P. FITTINGS made in Pakistan.
11. BATH ROOM ACCESSORIES complete range made in Pakistan.

Feel free to call or email to ask our representative at your door.

thanks

A.R. Corporation
CONTACT:  +92-300-2856741, 0333-3645773, 0342-5557322, 0322-3540656
DHA Sanitary Market Islamabad Pakistan.

RAKtherm Standards & Regulations

 Quality

RAKtherm Standards & Regulations RAKtherm Pipes and fittings are produced with the following standards and regulations: DIN 8076   Standard for testing metal threaded joints. DIN 8077   Polypropylene (PP) pipe dimensions. DIN 8078   Polypropylene (PP) pipes; general quality requirements testing & chemical resistance of pipes and fittings. DIN 2999   Standards for fittings with threaded metallic inserts. DIN 16962/Pt1   Pipe joint assemblies and fittings for type 1 & 2 polypropylene (PP) pressure pipes; bends produced by segment inserts for butt welding dimensions. DIN 16928   Installation, pipe and fitting connections. DIN 1988 DVGW Code of Practice (Drinking water supply systems; materials, components, appliances, design and installation). DIN 4109   Noise control in buildings. DIN 4140   Insulation of service installations. DVS 2207   Welding of thermoplastic pipes and fittings. DVS 2208   Welding machines & devices for thermoplastic pipes and fittings. OHSAS 18001   British standard for Health and safety management system. BS 6920   Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. ISO 9000-2000   Quality Management System Quality Guarantee RAKtherm always maintains the highest standards of quality for its users. To support this, RAKtherm warrants a 10-year guarantee for all its piping network components from the date of purchase. (Please ask your local representative for details) Maintaining A High Level Of Quality RAKtherm maintains a comprehensive quality control system beginning from designing the required specifications, to control of incoming raw materials processing of the product, packing, storage, shipping to the customer, and finally continuous servicing and support to guarantee that complete total quality is achieved. This is accomplished parallel to the Quality Assurance Program with the objective to ensure that total quality, and not only localized quality is maintained as required. The overall quality system operated and documented by RAKtherm is implemented throughout the plant. The overall system has been designed to exceed requirements stated by national and international authorities and institutions. Regular checks are done by neutral bodies, to further eliminate any chance of quality deviation. This is yet another quality assurance for our customer. A well-designed manufacturing process includes establishing the required specifications, and strictly adhering to them throughout the manufacturing process. This is assured by precise machinery, well trained staff, and continuously updated and modernized equipment. Ultrasonic measurement and in-process data recording on the production lines identify real-time changes in the process and assure that any deviations on the quality of the product to the set standard is avoided

POLO CONDUIT / and UPVC for Drian sever

Manufactured on BS-3505 (PIPE) BS-6099(FITTINGS) and SDR D-2241, Sizes from ½ to 18 inches pipe and ½ to 4” fitting.

PORTA CERAMICS. All Designs and ranges imported.

KENT / FIRST 
BATH ACCESSORIES. Made in Pakistan.

CONTACT:  +92-300-2856741, 0333-3645773, 0342-5557322, 0322-3540656